- Home
- All Categories
- Fasteners
- Bolts
13 Products found
M20X50HTS10.9
Set screw, hex, plain, GR 10.9, STD, 20 x 2.5 x 50 mm, Fastbolt.
Fastbolt
R22,05
Excl. VAT
Each
M20X60HTS10.9
Set screw, hex, plain, GR 10.9, STD, 20 x 2.5 x 60 mm, Fastbolt.
Fastbolt
R25,36
Excl. VAT
Each
M20X70HTS10.9
Set screw, hex, plain, GR 10.9, STD, 20 x 2.5 x 70 mm, Fastbolt.
Fastbolt
R28,67
Excl. VAT
Each
M20X80HTS10.9
Set screw, hex, plain, GR 10.9, STD, 20 x 2.5 x 80 mm, Fastbolt.
Fastbolt
R33,08
Excl. VAT
Each
M20X100HTS10.9
Set screw, hex, plain, GR 10.9, STD, 20 x 2.5 x 100 mm, Fastbolt.
Fastbolt
R39,70
Excl. VAT
Each
M22X80HTS10.9
Set screw, hex, plain, GR 10.9, STD, 22 x 2.5 x 80 mm, Fastbolt.
Fastbolt
R135,65
Excl. VAT
Each
M20X55HTS10.9
Set screw, hex, plain, GR 10.9, STD, 20 x 2.5 x 55 mm, Fastbolt.
Fastbolt
R24,26
Excl. VAT
Each
M20X75HTS10.9
Set screw, hex, plain, GR 10.9, STD, 20 x 2.5 x 75 mm, Fastbolt.
Fastbolt
R30,88
Excl. VAT
Each
M18X50HTS10.9
Set screw, hex, plain, GR 10.9, STD, 18 x 2.5 x 50 mm, Fastbolt.
Fastbolt
R24,26
Excl. VAT
Each
M20X130HTS10.9
Set screw, hex, plain, GR 10.9, STD, 20 x 2.5 x 130 mm, Fastbolt.
Fastbolt
R11,19
Excl. VAT
Each
M22X160HTS10.9
Set screw, hex, plain, GR 10.9, STD, 22 x 2.5 x 160 mm, Fastbolt.
Fastbolt
R29,13
Excl. VAT
Each
M18X60HTS10.9
Set screw, hex, plain, GR 10.9, STD, 18 x 2.5 x 60 mm, Fastbolt.
Fastbolt
R26,46
Excl. VAT
Each
M20X40HTS10.9
Set screw, hex, plain, GR 10.9, STD, 20 x 2.5 x 40 mm, Fastbolt.
Fastbolt
R19,84
Excl. VAT
Each
R22,05
Excl. VAT
Each
R25,36
Excl. VAT
Each
R28,67
Excl. VAT
Each
R33,08
Excl. VAT
Each
R39,70
Excl. VAT
Each
R135,65
Excl. VAT
Each
R24,26
Excl. VAT
Each
R30,88
Excl. VAT
Each
R24,26
Excl. VAT
Each
R11,19
Excl. VAT
Each
R29,13
Excl. VAT
Each
R26,46
Excl. VAT
Each
R19,84
Excl. VAT
Each
Added to Your Shopping Cart
Fasteners Bolts
A Fastener bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Fastener Bolts are very closely related to screws. Bolts come in various grades of steel such as mild steel, high tensile and stainless steel. Fasteners Bolts are designed to pass through an unthreaded hole in a component and be fastened with the aid of a nut, although such a fastener can be used without a nut to tighten into a threaded component such as a nut-plate or tapped housing. Screws in contrast are used in components which contain their own thread, or to cut its own internal thread into them. Fastener Bolts use a wide variety of head designs, as do screws. These are designed to engage with the tool used to tighten them. Some bolt heads instead lock the bolt in place, so that it does not move, and a tool is only needed for the nut end. Common bolt heads include hex and socket cap. The first bolts had square heads, formed by forging. These are still found, although much more common today is the hexagonal head. These are held and turned by a spanner or socket, of which there are many forms. Most are held from the side, some from in-line with the bolt. Other bolts have T-heads and slotted heads. Many Fastener bolts use a screwdriver head fitting, rather than an external wrench. Screwdrivers are applied in-line with the fastener, rather than from the side. These are smaller than most wrench heads and cannot usually apply the same amount of torque.
Product Availability by Store Location