- Home
- All Categories
- Fasteners
- Bolts
13 Products found
5-8X10UNCHTB
Bolt, hex, plain, GR 8.8, UNC, 15.875 x 254 mm, 11 TPI, Fastbolt.
Fastbolt
R86,12
Excl. VAT
Each
5-8X10UNFHTB
Bolt, hex, plain, GR 8.8, UNF, 15.875 x 254 mm, 18 TPI, Fastbolt.
Fastbolt
R44,46
Excl. VAT
Each
3-4X10UNCHTB
Bolt, hex, plain, GR 8.8, UNC, 19.05 x 254 mm, 10 TPI, Fastbolt.
Fastbolt
R120,73
Excl. VAT
Each
7-8X10UNCHTB
Bolt, hex, plain, GR 8.8, UNC, 22.225 x 254 mm, 9 TPI, Fastbolt.
Fastbolt
R169,24
Excl. VAT
Each
7-8X10UNFHTB
Bolt, hex, plain, GR 8.8, UNF, 22.225 x 254 mm, 14 TPI, Fastbolt.
Fastbolt
R205,24
Excl. VAT
Each
1X10UNCHTB
Bolt, hex, plain, GR 8.8, UNC, 25.4 x 254 mm, 64 TPI, Fastbolt.
Fastbolt
R221,29
Excl. VAT
Each
1.1-8X10UNCHTB
Bolt, hex, plain, GR 8.8, UNC, 28.575 x 254 mm, 7 TPI, Fastbolt.
Fastbolt
R242,54
Excl. VAT
Each
1.1-4X10UNCHTB
Bolt, hex, plain, GR 8.8, UNC, 31.75 x 254 mm, 7 TPI, Fastbolt.
Fastbolt
R372,79
Excl. VAT
Each
1.1-2X10UNCHTB
Bolt, hex, plain, GR 8.8, UNC, 38.1 x 254 mm, 6 TPI, Fastbolt.
Fastbolt
R451,58
Excl. VAT
Each
1.1-8X10UNFHTB
Bolt, hex, plain, GR 8.8, UNF, 28.575 x 254 mm, 12 TPI, Fastbolt.
Fastbolt
R843,91
Excl. VAT
Each
1.1-4X10UNFHTB
Bolt, hex, plain, GR 8.8, UNF, 31.75 x 254 mm, 12 TPI, Fastbolt.
Fastbolt
R337,21
Excl. VAT
Each
1.1-2X10UNFHTB
Bolt, hex, plain, GR 8.8, UNF, 38.1 x 254 mm, 12 TPI, Fastbolt.
Fastbolt
R1 570,97
Excl. VAT
Each
3-4X10UNFHTB
Bolt, hex, plain, GR 8.8, UNF, 19.05 x 254 mm, 16 TPI, Fastbolt.
Fastbolt
R146,42
Excl. VAT
Each
R86,12
Excl. VAT
Each
R44,46
Excl. VAT
Each
R120,73
Excl. VAT
Each
R169,24
Excl. VAT
Each
R205,24
Excl. VAT
Each
R221,29
Excl. VAT
Each
R242,54
Excl. VAT
Each
R372,79
Excl. VAT
Each
R451,58
Excl. VAT
Each
R843,91
Excl. VAT
Each
R337,21
Excl. VAT
Each
R1 570,97
Excl. VAT
Each
R146,42
Excl. VAT
Each
Added to Your Shopping Cart
Fasteners Bolts
A Fastener bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Fastener Bolts are very closely related to screws. Bolts come in various grades of steel such as mild steel, high tensile and stainless steel. Fasteners Bolts are designed to pass through an unthreaded hole in a component and be fastened with the aid of a nut, although such a fastener can be used without a nut to tighten into a threaded component such as a nut-plate or tapped housing. Screws in contrast are used in components which contain their own thread, or to cut its own internal thread into them. Fastener Bolts use a wide variety of head designs, as do screws. These are designed to engage with the tool used to tighten them. Some bolt heads instead lock the bolt in place, so that it does not move, and a tool is only needed for the nut end. Common bolt heads include hex and socket cap. The first bolts had square heads, formed by forging. These are still found, although much more common today is the hexagonal head. These are held and turned by a spanner or socket, of which there are many forms. Most are held from the side, some from in-line with the bolt. Other bolts have T-heads and slotted heads. Many Fastener bolts use a screwdriver head fitting, rather than an external wrench. Screwdrivers are applied in-line with the fastener, rather than from the side. These are smaller than most wrench heads and cannot usually apply the same amount of torque.
Product Availability by Store Location