- Home
- All Categories
- Fasteners
- Bolts
FILTER BY
Categories
Length (mm)
Thread Type
Type
M8X75HTBHDG
Bolt, hex, hot dip galvanised, GR 8.8, STD, 8 x 1.25 x 75 mm, Fastbolt.
Fastbolt
R3,75
Excl. VAT
Each
M8X55HTBYZP
Bolt, hex, yellow zinc plated, GR 8.8, STD, 8 x 1.25 x 55 mm, Fastbolt.
Fastbolt
R0,84
Excl. VAT
Each
M8X60HTBYZP
Bolt, hex, yellow zinc plated, GR 8.8, STD, 8 x 1.25 x 60 mm, Fastbolt.
Fastbolt
R1,21
Excl. VAT
Each
M8X65HTBYZP
Bolt, hex, yellow zinc plated, GR 8.8, STD, 8 x 1.25 x 65 mm, Fastbolt.
Fastbolt
R1,97
Excl. VAT
Each
M8X80HTBYZP
Bolt, hex, yellow zinc plated, GR 8.8, STD, 8 x 1.25 x 80 mm, Fastbolt.
Fastbolt
R2,98
Excl. VAT
Each
M8X100HTBYZP
Bolt, hex, yellow zinc plated, GR 8.8, STD, 8 x 1.25 x 100 mm, Fastbolt.
Fastbolt
R5,01
Excl. VAT
Each
M8X40HTS
Set screw, hex, plain, GR 8.8, STD, 8 x 1.25 x 40 mm, Fastbolt.
Fastbolt
R2,26
Excl. VAT
Each
M8X1.00X20HTSZP
Set screw, hex, zinc plated, GR 8.8, MF, 8 x 1 x 20 mm, Fastbolt.
Fastbolt
R3,43
Excl. VAT
Each
M8X40HTSZP
Set screw, hex, zinc plated, GR 8.8, STD, 8 x 1.25 x 40 mm, Fastbolt.
Fastbolt
R2,73
Excl. VAT
Each
M8X50HTSZP
Set screw, hex, zinc plated, GR 8.8, STD, 8 x 1.25 x 50 mm, Fastbolt.
Fastbolt
R3,14
Excl. VAT
Each
M8X70HTBYZP
Bolt, hex, yellow zinc plated, GR 8.8, STD, 8 x 1.25 x 70 mm, Fastbolt.
Fastbolt
R2,16
Excl. VAT
Each
M8X75HTBYZP
Bolt, hex, yellow zinc plated, GR 8.8, STD, 8 x 1.25 x 75 mm, Fastbolt.
Fastbolt
R2,59
Excl. VAT
Each
M8X110HTBYZP
Bolt, hex, yellow zinc plated, GR 8.8, STD, 8 x 1.25 x 110 mm, Fastbolt.
Fastbolt
R0,76
Excl. VAT
Each
M8X150HTBYZP
Bolt, hex, yellow zinc plated, GR 8.8, STD, 8 x 1.25 x 150 mm, Fastbolt.
Fastbolt
R8,86
Excl. VAT
Each
M8X30HTBZP
Bolt, hex, zinc plated, GR 8.8, STD, 8 x 1.25 x 30 mm, Fastbolt.
Fastbolt
R2,76
Excl. VAT
Each
M8X35HTBZP
Bolt, hex, zinc plated, GR 8.8, STD, 8 x 1.25 x 35 mm, Fastbolt.
Fastbolt
R2,51
Excl. VAT
Each
M8X40HTBZP
Bolt, hex, zinc plated, GR 8.8, STD, 8 x 1.25 x 40 mm, Fastbolt.
Fastbolt
R2,50
Excl. VAT
Each
M8X50HTBZP
Bolt, hex, zinc plated, GR 8.8, STD, 8 x 1.25 x 50 mm, Fastbolt.
Fastbolt
R3,08
Excl. VAT
Each
M8X100HTBZP
Bolt, hex, zinc plated, GR 8.8, STD, 8 x 1.25 x 100 mm, Fastbolt.
Fastbolt
R5,48
Excl. VAT
Each
M8X140HTBZP
Bolt, hex, zinc plated, GR 8.8, STD, 8 x 1.25 x 140 mm, Fastbolt.
Fastbolt
R9,40
Excl. VAT
Each
R3,75
Excl. VAT
Each
R0,84
Excl. VAT
Each
R1,21
Excl. VAT
Each
R1,97
Excl. VAT
Each
R2,98
Excl. VAT
Each
R5,01
Excl. VAT
Each
R2,26
Excl. VAT
Each
R3,43
Excl. VAT
Each
R2,73
Excl. VAT
Each
R3,14
Excl. VAT
Each
R2,16
Excl. VAT
Each
R2,59
Excl. VAT
Each
R0,76
Excl. VAT
Each
R8,86
Excl. VAT
Each
R2,76
Excl. VAT
Each
R2,51
Excl. VAT
Each
R2,50
Excl. VAT
Each
R3,08
Excl. VAT
Each
R5,48
Excl. VAT
Each
R9,40
Excl. VAT
Each
Added to Your Shopping Cart
Fasteners Bolts
A Fastener bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Fastener Bolts are very closely related to screws. Bolts come in various grades of steel such as mild steel, high tensile and stainless steel. Fasteners Bolts are designed to pass through an unthreaded hole in a component and be fastened with the aid of a nut, although such a fastener can be used without a nut to tighten into a threaded component such as a nut-plate or tapped housing. Screws in contrast are used in components which contain their own thread, or to cut its own internal thread into them. Fastener Bolts use a wide variety of head designs, as do screws. These are designed to engage with the tool used to tighten them. Some bolt heads instead lock the bolt in place, so that it does not move, and a tool is only needed for the nut end. Common bolt heads include hex and socket cap. The first bolts had square heads, formed by forging. These are still found, although much more common today is the hexagonal head. These are held and turned by a spanner or socket, of which there are many forms. Most are held from the side, some from in-line with the bolt. Other bolts have T-heads and slotted heads. Many Fastener bolts use a screwdriver head fitting, rather than an external wrench. Screwdrivers are applied in-line with the fastener, rather than from the side. These are smaller than most wrench heads and cannot usually apply the same amount of torque.
Product Availability by Store Location