- Home
- All Categories
- Fasteners
- Bolts
APPLIED FILTERS
-
Category :
-
Grade :
-
Thread Pitch (mm) :
-
Category :
FILTER BY
Length (mm)
Surface Finish
33 Products found
M30X50HTSZP
Set screw, hex, zinc plated, GR 8.8, STD, 30 x 3.5 x 50 mm, Fastbolt.
Fastbolt
R92,24
Excl. VAT
Each
M30X65HTSZP
Set screw, hex, zinc plated, GR 8.8, STD, 30 x 3.5 x 65 mm, Fastbolt.
Fastbolt
R103,92
Excl. VAT
Each
M30X110HTSZP
Set screw, hex, zinc plated, GR 8.8, STD, 30 x 3.5 x 110 mm, Fastbolt.
Fastbolt
R105,92
Excl. VAT
Each
M30X75HTSZP
Set screw, hex, zinc plated, GR 8.8, STD, 30 x 3.5 x 75 mm, Fastbolt.
Fastbolt
R226,23
Excl. VAT
Each
M30X80HTSZP
Set screw, hex, zinc plated, GR 8.8, STD, 30 x 3.5 x 80 mm, Fastbolt.
Fastbolt
R115,59
Excl. VAT
Each
M30X90HTSZP
Set screw, hex, zinc plated, GR 8.8, STD, 30 x 3.5 x 90 mm, Fastbolt.
Fastbolt
R123,37
Excl. VAT
Each
M30X120HTSZP
Set screw, hex, zinc plated, GR 8.8, STD, 30 x 3.5 x 120 mm, Fastbolt.
Fastbolt
R173,39
Excl. VAT
Each
M30X70HTSZP
Set screw, hex, zinc plated, GR 8.8, STD, 30 x 3.5 x 70 mm, Fastbolt.
Fastbolt
R107,81
Excl. VAT
Each
M30X150HTSHDG
Set screw, hex, hot dip galvanised, GR 8.8, STD, 30 x 3.5 x 150 mm, Fastbolt.
Fastbolt
R488,12
Excl. VAT
Each
M30X115HTSHDG
Set screw, hex, hot dip galvanised, GR 8.8, STD, 30 x 3.5 x 115 mm, Fastbolt.
Fastbolt
R0,02
Excl. VAT
Each
M30X130HTSHDG
Set screw, hex, hot dip galvanised, GR 8.8, STD, 30 x 3.5 x 130 mm, Fastbolt.
Fastbolt
R555,92
Excl. VAT
Each
M30X60HTS
Set screw, hex, plain, GR 8.8, STD, 30 x 3.5 x 60 mm, Fastbolt.
Fastbolt
R89,30
Excl. VAT
Each
M30X65HTS
Set screw, hex, plain, GR 8.8, STD, 30 x 3.5 x 65 mm, Fastbolt.
Fastbolt
R92,68
Excl. VAT
Each
M30X75HTS
Set screw, hex, plain, GR 8.8, STD, 30 x 3.5 x 75 mm, Fastbolt.
Fastbolt
R99,47
Excl. VAT
Each
M30X140HTS
Set screw, hex, plain, GR 8.8, STD, 30 x 3.5 x 140 mm, Fastbolt.
Fastbolt
R131,22
Excl. VAT
Each
M30X160HTS
Set screw, hex, plain, GR 8.8, STD, 30 x 3.5 x 160 mm, Fastbolt.
Fastbolt
R144,29
Excl. VAT
Each
M33X75HTS
Set screw, hex, plain, GR 8.8, STD, 33 x 3.5 x 75 mm, Fastbolt.
Fastbolt
R133,87
Excl. VAT
Each
M33X90HTS
Set screw, hex, plain, GR 8.8, STD, 33 x 3.5 x 90 mm, Fastbolt.
Fastbolt
R108,26
Excl. VAT
Each
M30X50HTS
Set screw, hex, plain, GR 8.8, STD, 30 x 3.5 x 50 mm, Fastbolt.
Fastbolt
R82,52
Excl. VAT
Each
M30X70HTS
Set screw, hex, plain, GR 8.8, STD, 30 x 3.5 x 70 mm, Fastbolt.
Fastbolt
R96,08
Excl. VAT
Each
R92,24
Excl. VAT
Each
R103,92
Excl. VAT
Each
R105,92
Excl. VAT
Each
R226,23
Excl. VAT
Each
R115,59
Excl. VAT
Each
R123,37
Excl. VAT
Each
R173,39
Excl. VAT
Each
R107,81
Excl. VAT
Each
M30X150HTSHDG
Set screw, hex, hot dip galvanised, GR 8.8, STD, 30 x 3.5 x 150 mm, Fastbolt.
Fastbolt
R488,12
Excl. VAT
Each
M30X115HTSHDG
Set screw, hex, hot dip galvanised, GR 8.8, STD, 30 x 3.5 x 115 mm, Fastbolt.
Fastbolt
R0,02
Excl. VAT
Each
M30X130HTSHDG
Set screw, hex, hot dip galvanised, GR 8.8, STD, 30 x 3.5 x 130 mm, Fastbolt.
Fastbolt
R555,92
Excl. VAT
Each
R89,30
Excl. VAT
Each
R92,68
Excl. VAT
Each
R99,47
Excl. VAT
Each
R131,22
Excl. VAT
Each
R144,29
Excl. VAT
Each
R133,87
Excl. VAT
Each
R108,26
Excl. VAT
Each
R82,52
Excl. VAT
Each
R96,08
Excl. VAT
Each
Added to Your Shopping Cart
Fasteners Bolts
A Fastener bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Fastener Bolts are very closely related to screws. Bolts come in various grades of steel such as mild steel, high tensile and stainless steel. Fasteners Bolts are designed to pass through an unthreaded hole in a component and be fastened with the aid of a nut, although such a fastener can be used without a nut to tighten into a threaded component such as a nut-plate or tapped housing. Screws in contrast are used in components which contain their own thread, or to cut its own internal thread into them. Fastener Bolts use a wide variety of head designs, as do screws. These are designed to engage with the tool used to tighten them. Some bolt heads instead lock the bolt in place, so that it does not move, and a tool is only needed for the nut end. Common bolt heads include hex and socket cap. The first bolts had square heads, formed by forging. These are still found, although much more common today is the hexagonal head. These are held and turned by a spanner or socket, of which there are many forms. Most are held from the side, some from in-line with the bolt. Other bolts have T-heads and slotted heads. Many Fastener bolts use a screwdriver head fitting, rather than an external wrench. Screwdrivers are applied in-line with the fastener, rather than from the side. These are smaller than most wrench heads and cannot usually apply the same amount of torque.
Product Availability by Store Location