- Home
- All Categories
- Fasteners
- Bolts
APPLIED FILTERS
-
Category :
-
Outside Diameter (mm) :
-
Surface Finish :
-
Grade :
-
Category :
FILTER BY
Length (mm)
Thread Type
27 Products found
M20X120HTS
Set screw, hex, plain, GR 8.8, STD, 20 x 2.5 x 120 mm, Fastbolt.
Fastbolt
R43,17
Excl. VAT
Each
M20X180HTS
Set screw, hex, plain, GR 8.8, STD, 20 x 2.5 x 180 mm, Fastbolt.
Fastbolt
R64,82
Excl. VAT
Each
M20X200HTS
Set screw, hex, plain, GR 8.8, STD, 20 x 2.5 x 200 mm, Fastbolt.
Fastbolt
R66,21
Excl. VAT
Each
M20X1.50X55HTS
Set screw, hex, plain, GR 8.8, MEF, 20 x 1.5 x 55 mm, Fastbolt.
Fastbolt
R24,90
Excl. VAT
Each
M20X55HTS
Set screw, hex, plain, GR 8.8, STD, 20 x 2.5 x 55 mm, Fastbolt.
Fastbolt
R22,48
Excl. VAT
Each
M20X60HTS
Set screw, hex, plain, GR 8.8, STD, 20 x 2.5 x 60 mm, Fastbolt.
Fastbolt
R23,79
Excl. VAT
Each
M20X1.50X50HTS
Set screw, hex, plain, GR 8.8, MEF,20 x 1.5 x 50 mm, Fastbolt.
Fastbolt
R30,78
Excl. VAT
Each
M20X1.50X70HTS
Set screw, hex, plain, GR 8.8, MEF,20 x 1.5 x 70 mm, Fastbolt.
Fastbolt
R56,19
Excl. VAT
Each
M20X35HTS
Set screw, hex, plain, GR 8.8, STD, 20 x 2.5 x 35 mm, Fastbolt.
Fastbolt
R19,02
Excl. VAT
Each
M20X30HTS
Set screw, hex, plain, GR 8.8, STD, 20 x 2.5 x 30 mm, Fastbolt.
Fastbolt
R19,04
Excl. VAT
Each
M20X40HTS
Set screw, hex, plain, GR 8.8, STD, 20 x 2.5 x 40 mm, Fastbolt.
Fastbolt
R19,15
Excl. VAT
Each
M20X45HTS
Set screw, hex, plain, GR 8.8, STD, 20 x 2.5 x 45 mm, Fastbolt.
Fastbolt
R19,37
Excl. VAT
Each
M20X50HTS
Set screw, hex, plain, GR 8.8, STD, 20 x 2.5 x 50 mm, Fastbolt.
Fastbolt
R21,42
Excl. VAT
Each
M20X1.50X60HTS
Set screw, hex, plain, GR 8.8, MEF, 20 x 1.5 x 60 mm, Fastbolt.
Fastbolt
R30,69
Excl. VAT
Each
M20X70HTS
Set screw, hex, plain, GR 8.8, STD, 20 x 2.5 x 70 mm, Fastbolt.
Fastbolt
R26,18
Excl. VAT
Each
M20X85HTS
Set screw, hex, plain, GR 8.8, STD, 20 x 2.5 x 85 mm, Fastbolt.
Fastbolt
R24,81
Excl. VAT
Each
M20X90HTS
Set screw, hex, plain, GR 8.8, STD, 20 x 2.5 x 90 mm, Fastbolt.
Fastbolt
R31,41
Excl. VAT
Each
M20X100HTS
Set screw, hex, plain, GR 8.8, STD, 20 x 2.5 x 100 mm, Fastbolt.
Fastbolt
R33,57
Excl. VAT
Each
M20X110HTS
Set screw, hex, plain, GR 8.8, STD, 20 x 2.5 x 110 mm, Fastbolt.
Fastbolt
R39,53
Excl. VAT
Each
M20X130HTS
Set screw, hex, plain, GR 8.8, STD, 20 x 2.5 x 130 mm, Fastbolt.
Fastbolt
R44,67
Excl. VAT
Each
R43,17
Excl. VAT
Each
R64,82
Excl. VAT
Each
R66,21
Excl. VAT
Each
R24,90
Excl. VAT
Each
R22,48
Excl. VAT
Each
R23,79
Excl. VAT
Each
R30,78
Excl. VAT
Each
R56,19
Excl. VAT
Each
R19,02
Excl. VAT
Each
R19,04
Excl. VAT
Each
R19,15
Excl. VAT
Each
R19,37
Excl. VAT
Each
R21,42
Excl. VAT
Each
R30,69
Excl. VAT
Each
R26,18
Excl. VAT
Each
R24,81
Excl. VAT
Each
R31,41
Excl. VAT
Each
R33,57
Excl. VAT
Each
R39,53
Excl. VAT
Each
R44,67
Excl. VAT
Each
Added to Your Shopping Cart
Fasteners Bolts
A Fastener bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Fastener Bolts are very closely related to screws. Bolts come in various grades of steel such as mild steel, high tensile and stainless steel. Fasteners Bolts are designed to pass through an unthreaded hole in a component and be fastened with the aid of a nut, although such a fastener can be used without a nut to tighten into a threaded component such as a nut-plate or tapped housing. Screws in contrast are used in components which contain their own thread, or to cut its own internal thread into them. Fastener Bolts use a wide variety of head designs, as do screws. These are designed to engage with the tool used to tighten them. Some bolt heads instead lock the bolt in place, so that it does not move, and a tool is only needed for the nut end. Common bolt heads include hex and socket cap. The first bolts had square heads, formed by forging. These are still found, although much more common today is the hexagonal head. These are held and turned by a spanner or socket, of which there are many forms. Most are held from the side, some from in-line with the bolt. Other bolts have T-heads and slotted heads. Many Fastener bolts use a screwdriver head fitting, rather than an external wrench. Screwdrivers are applied in-line with the fastener, rather than from the side. These are smaller than most wrench heads and cannot usually apply the same amount of torque.
Product Availability by Store Location