- Home
- All Categories
- Fasteners
- Bolts
13 Products found
M20X100S-SBA4
Bolt, hex, stainless steel, A4-316, STD, 20 x 2.5 x 100 mm, Fastbolt.
Fastbolt
R69,73
Excl. VAT
Each
M20X110S-SBA4
Bolt, hex, stainless steel, A4-316, STD, 20 x 2.5 x 110 mm, Fastbolt.
Fastbolt
R394,31
Excl. VAT
Each
M20X140S-SBA4
Bolt, hex, stainless steel, A4-316, STD, 20 x 2.5 x 140 mm, Fastbolt.
Fastbolt
R95,65
Excl. VAT
Each
M20X150S-SBA4
Bolt, hex, stainless steel, A4-316, STD, 20 x 2.5 x 150 mm, Fastbolt.
Fastbolt
R101,69
Excl. VAT
Each
M20X60S-SBA4
Bolt, hex, stainless steel, A4-316, STD, 20 x 2.5 x 60 mm, Fastbolt.
Fastbolt
R46,90
Excl. VAT
Each
M20X65S-SBA4
Bolt, hex, stainless steel, A4-316, STD, 20 x 2.5 x 65 mm, Fastbolt.
Fastbolt
R52,88
Excl. VAT
Each
M20X70S-SBA4
Bolt, hex, stainless steel, A4-316, STD, 20 x 2.5 x 70 mm, Fastbolt.
Fastbolt
R55,02
Excl. VAT
Each
M20X80S-SBA4
Bolt, hex, stainless steel, A4-316, STD, 20 x 2.5 x 80 mm, Fastbolt.
Fastbolt
R61,23
Excl. VAT
Each
M20X120S-SBA4
Bolt, hex, stainless steel, A4-316, STD, 20 x 2.5 x 120 mm, Fastbolt.
Fastbolt
R80,78
Excl. VAT
Each
M20X180S-SBA4
Bolt, hex, stainless steel, A4-316, STD, 20 x 2.5 x 180 mm, Fastbolt.
Fastbolt
R129,22
Excl. VAT
Each
M20X75S-SBA4
Bolt, hex, stainless steel, A4-316, STD, 20 x 2.5 x 75 mm, Fastbolt.
Fastbolt
R57,44
Excl. VAT
Each
M20X90S-SBA4
Bolt, hex, stainless steel, A4-316, STD, 20 x 2.5 x 90 mm, Fastbolt.
Fastbolt
R65,89
Excl. VAT
Each
R69,73
Excl. VAT
Each
R394,31
Excl. VAT
Each
R95,65
Excl. VAT
Each
R101,69
Excl. VAT
Each
TBQ
R46,90
Excl. VAT
Each
R52,88
Excl. VAT
Each
R55,02
Excl. VAT
Each
R61,23
Excl. VAT
Each
R80,78
Excl. VAT
Each
R129,22
Excl. VAT
Each
R57,44
Excl. VAT
Each
R65,89
Excl. VAT
Each
Added to Your Shopping Cart
Fasteners Bolts
A Fastener bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Fastener Bolts are very closely related to screws. Bolts come in various grades of steel such as mild steel, high tensile and stainless steel. Fasteners Bolts are designed to pass through an unthreaded hole in a component and be fastened with the aid of a nut, although such a fastener can be used without a nut to tighten into a threaded component such as a nut-plate or tapped housing. Screws in contrast are used in components which contain their own thread, or to cut its own internal thread into them. Fastener Bolts use a wide variety of head designs, as do screws. These are designed to engage with the tool used to tighten them. Some bolt heads instead lock the bolt in place, so that it does not move, and a tool is only needed for the nut end. Common bolt heads include hex and socket cap. The first bolts had square heads, formed by forging. These are still found, although much more common today is the hexagonal head. These are held and turned by a spanner or socket, of which there are many forms. Most are held from the side, some from in-line with the bolt. Other bolts have T-heads and slotted heads. Many Fastener bolts use a screwdriver head fitting, rather than an external wrench. Screwdrivers are applied in-line with the fastener, rather than from the side. These are smaller than most wrench heads and cannot usually apply the same amount of torque.
Product Availability by Store Location