- Home
- All Categories
- Fasteners
- Bolts
FILTER BY
Categories
Material
Surface Finish
9 Products found
M16X125MSBZP
Bolt, hex, zinc plated, GR 4.8, STD, 16 x 2 x 125 mm, Fastbolt.
Fastbolt
R16,24
Excl. VAT
Each
M16X125MSBNZP
Bolt & nut, hex, zinc plated, bag, GR 4.8, STD, 16 x 2 x 125 mm, 102 p/bag, Fastbolt.
Fastbolt
R117,88
Per Kg
Excl. VAT
M16X125HTS
Set screw, hex, plain, GR 8.8, STD, 16 x 2 x 125 mm, Fastbolt.
Fastbolt
R25,10
Excl. VAT
Each
M16X125MSUBNWZP
U Bolt, non hex, zinc plated, GR 4.8, STD, 16 x 2 x 125 mm, Fastbolt.
Fastbolt
R68,08
Excl. VAT
Each
M16X125HTJB
J Bolt, non hex, plain, GR 8.8, STD, 16 x 2 x 125 mm, Fastbolt.
Fastbolt
R15,40
Excl. VAT
Each
M16X125MSBNHDG
Bolt & nut, hex, hot dip galvanised, bag, GR 4.8, STD, 16 x 2 x 125 mm, 99 p/bag, Fastbolt.
Fastbolt
R131,46
Per Kg
Excl. VAT
M16X125MSBN
Bolt & nut, hex, plain, bag, GR 4.8, STD, 16 x 2 x 125 mm, 102 p/bag, Fastbolt.
Fastbolt
R98,24
Per Kg
Excl. VAT
M16X125MSUBNWHDG
U Bolt, non hex, hot dip galvanised, GR 4.8, STD, 16 x 2 x 125 mm, Fastbolt.
Fastbolt
R104,44
Excl. VAT
Each
R16,24
Excl. VAT
Each
M16X125MSBNZP
Bolt & nut, hex, zinc plated, bag, GR 4.8, STD, 16 x 2 x 125 mm, 102 p/bag, Fastbolt.
Fastbolt
R117,88
Per Kg
Excl. VAT
R25,10
Excl. VAT
Each
R68,08
Excl. VAT
Each
R15,40
Excl. VAT
Each
M16X125MSBNHDG
Bolt & nut, hex, hot dip galvanised, bag, GR 4.8, STD, 16 x 2 x 125 mm, 99 p/bag, Fastbolt.
Fastbolt
R131,46
Per Kg
Excl. VAT
R13,55
Excl. VAT
Each
M16X125MSBN
Bolt & nut, hex, plain, bag, GR 4.8, STD, 16 x 2 x 125 mm, 102 p/bag, Fastbolt.
Fastbolt
R98,24
Per Kg
Excl. VAT
M16X125MSUBNWHDG
U Bolt, non hex, hot dip galvanised, GR 4.8, STD, 16 x 2 x 125 mm, Fastbolt.
Fastbolt
R104,44
Excl. VAT
Each
Added to Your Shopping Cart
Fasteners Bolts
A Fastener bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Fastener Bolts are very closely related to screws. Bolts come in various grades of steel such as mild steel, high tensile and stainless steel. Fasteners Bolts are designed to pass through an unthreaded hole in a component and be fastened with the aid of a nut, although such a fastener can be used without a nut to tighten into a threaded component such as a nut-plate or tapped housing. Screws in contrast are used in components which contain their own thread, or to cut its own internal thread into them. Fastener Bolts use a wide variety of head designs, as do screws. These are designed to engage with the tool used to tighten them. Some bolt heads instead lock the bolt in place, so that it does not move, and a tool is only needed for the nut end. Common bolt heads include hex and socket cap. The first bolts had square heads, formed by forging. These are still found, although much more common today is the hexagonal head. These are held and turned by a spanner or socket, of which there are many forms. Most are held from the side, some from in-line with the bolt. Other bolts have T-heads and slotted heads. Many Fastener bolts use a screwdriver head fitting, rather than an external wrench. Screwdrivers are applied in-line with the fastener, rather than from the side. These are smaller than most wrench heads and cannot usually apply the same amount of torque.
Product Availability by Store Location