- Home
- All Categories
- Fasteners
- Bolts
FILTER BY
Thread Type
Surface Finish
12 Products found
M24X120HTB10.9
Bolt, hex, plain, GR 10.9, STD, 24 x 3 x 120 mm, Fastbolt.
Fastbolt
R78,79
Excl. VAT
Each
M10X120HTB10.9
Bolt, hex, plain, GR 10.9, STD, 10 x 1.5 x 120 mm, Fastbolt.
Fastbolt
R13,50
Excl. VAT
Each
M12X120HTB10.9
Bolt, hex, plain, GR 10.9, STD, 12 x 1.75 x 120 mm, Fastbolt.
Fastbolt
R19,13
Excl. VAT
Each
M16X120HTB10.9
Bolt, hex, plain, GR 10.9, STD, 16 x 2 x 120 mm, Fastbolt.
Fastbolt
R33,76
Excl. VAT
Each
M18X120HTB10.9
Bolt, hex, plain, GR 10.9, STD, 18 x 2.5 x 120 mm, Fastbolt.
Fastbolt
R118,63
Excl. VAT
Each
M22X120HTB10.9
Bolt, hex, plain, GR 10.9, STD, 22 x 2.5 x 120 mm, Fastbolt.
Fastbolt
R84,42
Excl. VAT
Each
M27X120HTB10.9
Bolt, hex, plain, GR 10.9, STD, 27 x 3 x 120 mm, Fastbolt.
Fastbolt
R151,94
Excl. VAT
Each
M20X120HTB10.9
Bolt, hex, plain, GR 10.9, STD, 20 x 2.5 x 120 mm, Fastbolt.
Fastbolt
R53,46
Excl. VAT
Each
M30X120HTB10.9
Bolt, hex, plain, GR 10.9, STD, 30 x 3.5 x 120 mm, Fastbolt.
Fastbolt
R182,90
Excl. VAT
Each
M14X120HTB10.9ZP
Bolt, hex, zinc plated, GR 10.9, STD, 14 x 2 x 120 mm, Fastbolt.
Fastbolt
R31,79
Excl. VAT
Each
M24X1.5X120HTB10.9ZP
Bolt, hex, zinc plated, GR 10.9, MEF, 24 x 1.5 x 120 mm, Fastbolt.
Fastbolt
R61,74
Excl. VAT
Each
M16X1.50X120HTB10.9ZP
Bolt, hex, zinc plated, GR 10.9, MF, 16 x 1.5 x 120 mm, Fastbolt.
Fastbolt
R55,70
Excl. VAT
Each
R78,79
Excl. VAT
Each
R13,50
Excl. VAT
Each
R19,13
Excl. VAT
Each
R33,76
Excl. VAT
Each
R118,63
Excl. VAT
Each
R84,42
Excl. VAT
Each
R151,94
Excl. VAT
Each
R53,46
Excl. VAT
Each
R182,90
Excl. VAT
Each
R31,79
Excl. VAT
Each
R61,74
Excl. VAT
Each
R55,70
Excl. VAT
Each
Added to Your Shopping Cart
Fasteners Bolts
A Fastener bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Fastener Bolts are very closely related to screws. Bolts come in various grades of steel such as mild steel, high tensile and stainless steel. Fasteners Bolts are designed to pass through an unthreaded hole in a component and be fastened with the aid of a nut, although such a fastener can be used without a nut to tighten into a threaded component such as a nut-plate or tapped housing. Screws in contrast are used in components which contain their own thread, or to cut its own internal thread into them. Fastener Bolts use a wide variety of head designs, as do screws. These are designed to engage with the tool used to tighten them. Some bolt heads instead lock the bolt in place, so that it does not move, and a tool is only needed for the nut end. Common bolt heads include hex and socket cap. The first bolts had square heads, formed by forging. These are still found, although much more common today is the hexagonal head. These are held and turned by a spanner or socket, of which there are many forms. Most are held from the side, some from in-line with the bolt. Other bolts have T-heads and slotted heads. Many Fastener bolts use a screwdriver head fitting, rather than an external wrench. Screwdrivers are applied in-line with the fastener, rather than from the side. These are smaller than most wrench heads and cannot usually apply the same amount of torque.
Product Availability by Store Location