- Home
- All Categories
- Fasteners
- Bolts
APPLIED FILTERS
FILTER BY
Material
Surface Finish
10 Products found
M16X180HTBHDG
Bolt, hex, hot dip galvanised, GR 8.8, STD, 16 x 2 x 180 mm, Fastbolt.
Fastbolt
R47,14
Excl. VAT
Each
M16X180MSBNHDG
Bolt & nut, hex, hot dip galvanised, bag, GR 4.8, STD, 16 x 2 x 180 mm, 76 p/bag, Fastbolt.
Fastbolt
R137,36
Per Kg
Excl. VAT
M16X180HTB10.9
Bolt, hex, plain, GR 10.9, STD, 16 x 2 x 180 mm, Fastbolt.
Fastbolt
R50,65
Excl. VAT
Each
M16X180MSBN
Bolt & nut, hex, plain, bag, GR 4.8, STD, 16 x 2 x 180 mm, 76 p/bag, Fastbolt.
Fastbolt
R104,23
Per Kg
Excl. VAT
M16X180HTBZP
Bolt, hex, zinc plated, GR 8.8, STD, 16 x 2 x 180 mm, Fastbolt.
Fastbolt
R42,88
Excl. VAT
Each
M16X180MSBNZP
Bolt & nut, hex, zinc plated, bag, GR 4.8, STD, 16 x 2 x 180 mm, 76 p/bag, Fastbolt.
Fastbolt
R124,01
Per Kg
Excl. VAT
M16X180S-SBA2
Bolt, hex, stainless steel, A2-304, STD, 16 x 2 x 180 mm, Fastbolt.
Fastbolt
R57,09
Excl. VAT
Each
M16X180S-SBA4
Bolt, hex, stainless steel, A4-316, STD, 16 x 2 x 180 mm, Fastbolt.
Fastbolt
R429,07
Excl. VAT
Each
R47,14
Excl. VAT
Each
M16X180MSBNHDG
Bolt & nut, hex, hot dip galvanised, bag, GR 4.8, STD, 16 x 2 x 180 mm, 76 p/bag, Fastbolt.
Fastbolt
R137,36
Per Kg
Excl. VAT
R50,65
Excl. VAT
Each
R36,97
Excl. VAT
Each
R20,19
Excl. VAT
Each
R104,23
Per Kg
Excl. VAT
R42,88
Excl. VAT
Each
M16X180MSBNZP
Bolt & nut, hex, zinc plated, bag, GR 4.8, STD, 16 x 2 x 180 mm, 76 p/bag, Fastbolt.
Fastbolt
R124,01
Per Kg
Excl. VAT
R57,09
Excl. VAT
Each
R429,07
Excl. VAT
Each
Added to Your Shopping Cart
Fasteners Bolts
A Fastener bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Fastener Bolts are very closely related to screws. Bolts come in various grades of steel such as mild steel, high tensile and stainless steel. Fasteners Bolts are designed to pass through an unthreaded hole in a component and be fastened with the aid of a nut, although such a fastener can be used without a nut to tighten into a threaded component such as a nut-plate or tapped housing. Screws in contrast are used in components which contain their own thread, or to cut its own internal thread into them. Fastener Bolts use a wide variety of head designs, as do screws. These are designed to engage with the tool used to tighten them. Some bolt heads instead lock the bolt in place, so that it does not move, and a tool is only needed for the nut end. Common bolt heads include hex and socket cap. The first bolts had square heads, formed by forging. These are still found, although much more common today is the hexagonal head. These are held and turned by a spanner or socket, of which there are many forms. Most are held from the side, some from in-line with the bolt. Other bolts have T-heads and slotted heads. Many Fastener bolts use a screwdriver head fitting, rather than an external wrench. Screwdrivers are applied in-line with the fastener, rather than from the side. These are smaller than most wrench heads and cannot usually apply the same amount of torque.
Product Availability by Store Location