- Home
- All Categories
- Seals
- Pneumatic
FILTER BY
Inside Diameter (mm)
Outside Diameter (mm)
35 Products found
UM 1109513.5 IUH NOK
Piston / rod u seal, metric, nitrile rubber, 95 x 110 x 13.5 mm, NOK.
NOK
R243,01
Excl. VAT
Each
UM 1301159 IUH NOK
Piston / rod u seal, metric, nitrile rubber, 115 x 130 x 9 mm, NOK.
NOK
R337,75
Excl. VAT
Each
UM 18016016 IUH NOK
Piston / rod u seal, metric, nitrile rubber, 160 x 180 x 16 mm, NOK.
NOK
R2Â 497,52
Excl. VAT
Each
UM 55457 NOK
Piston / rod u seal, metric, nitrile rubber, 45 x 55 x 7 mm, NOK.
NOK
R56,41
Excl. VAT
Each
UM 938010 NOK
Piston / rod u seal, metric, nitrile rubber, 80 x 93 x 10 mm, NOK.
NOK
R117,85
Excl. VAT
Each
UM 1059010 NOK
Piston / rod u seal, metric, nitrile rubber, 90 x 105 x 10 mm, NOK.
NOK
R228,40
Excl. VAT
Each
UM 13011010 NOK
Piston / rod u seal, metric, nitrile rubber, 110 x 130 x 10 mm, NOK.
NOK
R288,40
Excl. VAT
Each
UM 16014010 NOK
Piston / rod u seal, metric, nitrile rubber, 140 x 160 x 10 mm, NOK.
NOK
R736,99
Excl. VAT
Each
UM 20017519 NOK
Piston / rod u seal, metric, nitrile rubber, 175 x 200 x 19 mm, NOK.
NOK
R636,77
Excl. VAT
Each
UM 21519016 NOK
Piston / rod u seal, metric, nitrile rubber, 190 x 215 x 16 mm, NOK.
NOK
R810,83
Excl. VAT
Each
UM 18516015 UPH
Piston / rod u seal, metric, nitrile rubber, 160 x 185 x 15 mm, NOK.
NOK
R548,86
Excl. VAT
Each
UM 56457 USH
Piston / rod u seal, metric, nitrile rubber, 45 x 56 x 7 mm, NOK.
NOK
R120,44
Excl. VAT
Each
UM 1601459 USH NOK
Piston / rod u seal, metric, nitrile rubber, 145 x 160 x 9 mm, NOK.
NOK
R280,51
Excl. VAT
Each
TBQ
TBQ
TBQ
TBQ
TBQ
R243,01
Excl. VAT
Each
TBQ
R337,75
Excl. VAT
Each
R2Â 497,52
Excl. VAT
Each
R56,41
Excl. VAT
Each
R117,85
Excl. VAT
Each
R228,40
Excl. VAT
Each
R288,40
Excl. VAT
Each
R736,99
Excl. VAT
Each
R636,77
Excl. VAT
Each
R810,83
Excl. VAT
Each
R548,86
Excl. VAT
Each
R120,44
Excl. VAT
Each
R280,51
Excl. VAT
Each
TBQ
Added to Your Shopping Cart
Pneumatic seals
Pneumatic seals are easily confused for Hydraulic Seals because of the similar u-shape profile. At BMG we have Product Specialists who can assist you with all your pneumatic seal applications. The key differences with pneumatic seals are the capabilities of a faster shaft speed over your slower hydraulic seals. The downside however is the lack of power transfer the pneumatic seals can achieve. Because pneumatic seals are made from a different elastomer, they can also achieve higher temperatures. Some materials used in pneumatic seals applications are Fluorocarbon rubber, Nitrile rubber, Silicone Rubber, EPDM, PTFE, and even Polyurethane. We refer to pneumatic seal as reciprocating seals for cylinder applications which provides linear motion. Common seals in these pneumatic cylinders include statics seals, wiper seals, o-rings, shaft seals, u-cups, piston seals and even backups. We at Bearing Man Group’s Seals division stock a wide variety of pneumatic seals for single and double acting pneumatic cylinders. Pneumatic seals work best between 4-6 bar pressure.
Product Availability by Store Location