- Home
- All Categories
- Fasteners
- Bolts
APPLIED FILTERS
-
Category :
-
Surface Finish :
-
Thread Type :
FILTER BY
Categories
Length (mm)
Type
M12X1.25X60HTB
Bolt, hex, plain, GR 8.8, MEF, 12 x 1.25 x 60 mm, Fastbolt.
Fastbolt
R11,90
Excl. VAT
Each
M12X1.25X65HTB
Bolt, hex, plain, GR 8.8, MEF, 12 x 1.25 x 65 mm, Fastbolt.
Fastbolt
R11,60
Excl. VAT
Each
M12X1.25X70HTB
Bolt, hex, plain, GR 8.8, MEF, 12 x 1.25 x 70 mm, Fastbolt.
Fastbolt
R10,61
Excl. VAT
Each
M12X1.25X75HTB
Bolt, hex, plain, GR 8.8, MEF, 12 x 1.25 x 75 mm, Fastbolt.
Fastbolt
R14,18
Excl. VAT
Each
M12X1.25X100HTB
Bolt, hex, plain, GR 8.8, MEF, 12 x 1.25 x 100 mm, Fastbolt.
Fastbolt
R18,90
Excl. VAT
Each
M12X1.25X120HTB
Bolt, hex, plain, GR 8.8, MEF, 12 x 1.25 x 120 mm, Fastbolt.
Fastbolt
R22,76
Excl. VAT
Each
M12X1.25X150HTB
Bolt, hex, plain, GR 8.8, MEF, 12 x 1.25 x 150 mm, Fastbolt.
Fastbolt
R42,27
Excl. VAT
Each
M12X1.25X50HTB
Bolt, hex, plain, GR 8.8, MEF, 12 x 1.25 x 50 mm, Fastbolt.
Fastbolt
R12,43
Excl. VAT
Each
M12X1.25X55HTB
Bolt, hex, plain, GR 8.8, MEF, 12 x 1.25 x 55 mm, Fastbolt.
Fastbolt
R14,66
Excl. VAT
Each
M12X1.25X80HTB
Bolt, hex, plain, GR 8.8, MEF, 12 x 1.25 x 80 mm, Fastbolt.
Fastbolt
R14,54
Excl. VAT
Each
M12X1.25X90HTB
Bolt, hex, plain, GR 8.8, MEF, 12 x 1.25 x 90 mm, Fastbolt.
Fastbolt
R6,98
Excl. VAT
Each
M12X1.25X110HTB
Bolt, hex, plain, GR 8.8, MEF, 12 x 1.25 x 110 mm, Fastbolt.
Fastbolt
R26,48
Excl. VAT
Each
M12X1.25X130HTB
Bolt, hex, plain, GR 8.8, MEF, 12 x 1.25 x 130 mm, Fastbolt.
Fastbolt
R20,09
Excl. VAT
Each
M24X1.50X270HTB
Bolt, hex, plain, GR 8.8, MEF, 24 x 1.5 x 270 mm, Fastbolt.
Fastbolt
R227,18
Excl. VAT
Each
M12X1.25X35HTB10.9
Bolt, hex, plain, GR 10.9, MEF, 12 x 1.25 x 35 mm, Fastbolt.
Fastbolt
R36,44
Excl. VAT
Each
M12X1.25X50HTB10.9
Bolt, hex, plain, GR 10.9, MEF, 12 x 1.25 x 50 mm, Fastbolt.
Fastbolt
R8,64
Excl. VAT
Each
M18X1.50X100HTB10.9
Bolt, hex, plain, GR 10.9, MEF, 18 x 1.5 x 100 mm, Fastbolt.
Fastbolt
R44,11
Excl. VAT
Each
M20X1.50X80HTB10.9
Bolt, hex, plain, GR 10.9, MEF, 20 x 1.5 x 80 mm, Fastbolt.
Fastbolt
R50,39
Excl. VAT
Each
M20X1.5X100HTB10.9
Bolt, hex, plain, GR 10.9, MEF, 20 x 1.5 x 100 mm, Fastbolt.
Fastbolt
R33,26
Excl. VAT
Each
M18X1.50X70HTB
Bolt, hex, plain, GR 8.8, MEF, 18 x 1.5 x 70 mm, Fastbolt.
Fastbolt
R28,58
Excl. VAT
Each
R11,90
Excl. VAT
Each
R11,60
Excl. VAT
Each
R10,61
Excl. VAT
Each
R14,18
Excl. VAT
Each
R18,90
Excl. VAT
Each
R22,76
Excl. VAT
Each
R42,27
Excl. VAT
Each
R12,43
Excl. VAT
Each
R14,66
Excl. VAT
Each
R14,54
Excl. VAT
Each
R6,98
Excl. VAT
Each
R26,48
Excl. VAT
Each
R20,09
Excl. VAT
Each
R227,18
Excl. VAT
Each
R36,44
Excl. VAT
Each
R8,64
Excl. VAT
Each
R44,11
Excl. VAT
Each
R50,39
Excl. VAT
Each
R33,26
Excl. VAT
Each
R28,58
Excl. VAT
Each
Added to Your Shopping Cart
Fasteners Bolts
A Fastener bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Fastener Bolts are very closely related to screws. Bolts come in various grades of steel such as mild steel, high tensile and stainless steel. Fasteners Bolts are designed to pass through an unthreaded hole in a component and be fastened with the aid of a nut, although such a fastener can be used without a nut to tighten into a threaded component such as a nut-plate or tapped housing. Screws in contrast are used in components which contain their own thread, or to cut its own internal thread into them. Fastener Bolts use a wide variety of head designs, as do screws. These are designed to engage with the tool used to tighten them. Some bolt heads instead lock the bolt in place, so that it does not move, and a tool is only needed for the nut end. Common bolt heads include hex and socket cap. The first bolts had square heads, formed by forging. These are still found, although much more common today is the hexagonal head. These are held and turned by a spanner or socket, of which there are many forms. Most are held from the side, some from in-line with the bolt. Other bolts have T-heads and slotted heads. Many Fastener bolts use a screwdriver head fitting, rather than an external wrench. Screwdrivers are applied in-line with the fastener, rather than from the side. These are smaller than most wrench heads and cannot usually apply the same amount of torque.
Product Availability by Store Location