- Home
- All Categories
- Fasteners
- Bolts
APPLIED FILTERS
-
Category :
-
Surface Finish :
-
Thread Type :
-
Type :
FILTER BY
32 Products found
M10X1.00X40HTS
Set screw, hex, plain, GR 8.8, MEF, 10 x 1 x 40 mm, Fastbolt.
Fastbolt
R5,49
Excl. VAT
Each
M12X1.25X40HTS
Set screw, hex, plain, GR 8.8, MEF, 12 x 1.25 x 40 mm, Fastbolt.
Fastbolt
R8,84
Excl. VAT
Each
M12X1.25X45HTS
Set screw, hex, plain, GR 8.8, MEF, 12 x 1.25 x 45 mm, Fastbolt.
Fastbolt
R8,31
Excl. VAT
Each
M12X1.25X50HTS
Set screw, hex, plain, GR 8.8, MEF, 12 x 1.25 x 50 mm, Fastbolt.
Fastbolt
R8,83
Excl. VAT
Each
M12X1.25X60HTS
Set screw, hex, plain, GR 8.8, MEF, 12 x 1.25 x 60 mm, Fastbolt.
Fastbolt
R11,49
Excl. VAT
Each
M12X1.25X40HTS10.9
Set screw, hex, plain, GR 10.9, MEF, 12 x 1.25 x 40 mm, Fastbolt.
Fastbolt
R10,56
Excl. VAT
Each
M18X1.50X40HTS10.9
Set screw, hex, plain, GR 10.9, MEF, 18 x 1.5 x 40 mm, Fastbolt.
Fastbolt
R42,65
Excl. VAT
Each
M18X1.50X60HTS10.9
Set screw, hex, plain, GR 10.9, MEF, 18 x 1.5 x 60 mm, Fastbolt.
Fastbolt
R30,42
Excl. VAT
Each
M18X1.5X50HTS
Set screw, hex, plain, GR 8.8, MEF, 18 x 1.5 x 50 mm, Fastbolt.
Fastbolt
R25,97
Excl. VAT
Each
M20X1.50X55HTS
Set screw, hex, plain, GR 8.8, MEF, 20 x 1.5 x 55 mm, Fastbolt.
Fastbolt
R24,90
Excl. VAT
Each
M22X1.50X40HTS
Set screw, hex, plain, GR 8.8, MEF, 22 x 1.5 x 40 mm, Fastbolt.
Fastbolt
R55,18
Excl. VAT
Each
M24X1.50X40HTS
Set screw, hex, plain, GR 8.8, MEF, 24 x 1.5 x 40 mm, Fastbolt.
Fastbolt
R52,28
Excl. VAT
Each
M24X1.50X60HTS
Set screw, hex, plain, GR 8.8, MEF, 24 x 1.5 x 60 mm, Fastbolt.
Fastbolt
R57,99
Excl. VAT
Each
M10X1.00X30HTS
Set screw, hex, plain, GR 8.8, MEF,10 x 1 x 30 mm, Fastbolt.
Fastbolt
R4,78
Excl. VAT
Each
M18X1.50X50HTS
Set screw, hex, plain, GR 8.8, MEF,18 x 1.5 x 50 mm, Fastbolt.
Fastbolt
R34,62
Excl. VAT
Each
M10X1.00X20HTS
Set screw, hex, plain, GR 8.8, MEF,10 x 1 x 20 mm, Fastbolt.
Fastbolt
R4,80
Excl. VAT
Each
M10X1.00X50HTS
Set screw, hex, plain, GR 8.8, MEF,10 x 1 x 50 mm, Fastbolt.
Fastbolt
R7,12
Excl. VAT
Each
M12X1.25X30HTS
Set screw, hex, plain, GR 8.8, MEF,12 x 1.25 x 30 mm, Fastbolt.
Fastbolt
R7,13
Excl. VAT
Each
M20X1.50X50HTS
Set screw, hex, plain, GR 8.8, MEF,20 x 1.5 x 50 mm, Fastbolt.
Fastbolt
R30,78
Excl. VAT
Each
M20X1.50X70HTS
Set screw, hex, plain, GR 8.8, MEF,20 x 1.5 x 70 mm, Fastbolt.
Fastbolt
R56,19
Excl. VAT
Each
R5,49
Excl. VAT
Each
R8,84
Excl. VAT
Each
R8,31
Excl. VAT
Each
R8,83
Excl. VAT
Each
R11,49
Excl. VAT
Each
R10,56
Excl. VAT
Each
R42,65
Excl. VAT
Each
R30,42
Excl. VAT
Each
R25,97
Excl. VAT
Each
R24,90
Excl. VAT
Each
R55,18
Excl. VAT
Each
R52,28
Excl. VAT
Each
R57,99
Excl. VAT
Each
R4,78
Excl. VAT
Each
R34,62
Excl. VAT
Each
R4,80
Excl. VAT
Each
R7,12
Excl. VAT
Each
R7,13
Excl. VAT
Each
R30,78
Excl. VAT
Each
R56,19
Excl. VAT
Each
Added to Your Shopping Cart
Fasteners Bolts
A Fastener bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Fastener Bolts are very closely related to screws. Bolts come in various grades of steel such as mild steel, high tensile and stainless steel. Fasteners Bolts are designed to pass through an unthreaded hole in a component and be fastened with the aid of a nut, although such a fastener can be used without a nut to tighten into a threaded component such as a nut-plate or tapped housing. Screws in contrast are used in components which contain their own thread, or to cut its own internal thread into them. Fastener Bolts use a wide variety of head designs, as do screws. These are designed to engage with the tool used to tighten them. Some bolt heads instead lock the bolt in place, so that it does not move, and a tool is only needed for the nut end. Common bolt heads include hex and socket cap. The first bolts had square heads, formed by forging. These are still found, although much more common today is the hexagonal head. These are held and turned by a spanner or socket, of which there are many forms. Most are held from the side, some from in-line with the bolt. Other bolts have T-heads and slotted heads. Many Fastener bolts use a screwdriver head fitting, rather than an external wrench. Screwdrivers are applied in-line with the fastener, rather than from the side. These are smaller than most wrench heads and cannot usually apply the same amount of torque.
Product Availability by Store Location